Did you know?
Even with a properly installed refrigerated air dryer located at or near the air compressor site, the fact that your plumbing is exposed to the changes in temperature will allow moisture to reappear along this route. Even worse is when the plumbing is allowed to sag or have low spots to drop around a structure or object. This low spot will, over time fill with moisture, and perhaps compressor oils, that at some point will move down stream into your pneumatic tool, or spray paint application, all at one time. The best advice to make sure this does not happen is to install a properly sized compressed air filter at the point of use.
Walcom GENESI SP HTE Paint Gun
GENESI HTE SYSTEM
Newly conceived HIGH TRANSFER EFFICIENCY spray gun that permits the user to associate the typical methods of a conventional spray gun in terms of pressure, distance and application speed with those of a HVLP spray gun in terms of Transfer Efficiency.
The balance between the internal air passages and the head and nozzle diffusion holes let the operator work with a cap pressure of about 17 PSI while still achieving > 65% transfer efficiency.
Ideal for transparent HS and VHS but also excellent for water and solvent bases, teh GENESI HTE guarantees high level atomization levels.
Among the distinguishing GENESI HTE features are:
- Reduced air consumption
- Transfer efficiency over 70% tested by the most qualified Italian and European boards
- Maintenance ease
- Resistant to aggressive solvents and strippers
- Specific cap for H2O based paints