View Cart (0)
Did you know?Even with a properly installed refrigerated air dryer located at or near the air compressor site, the fact that your plumbing is exposed to the changes in temperature will allow moisture to reappear along this route. Even worse is when the plumbing is allowed to sag or have low spots to drop around a structure or object. This low spot will, over time fill with moisture, and perhaps compressor oils, that at some point will move down stream into your pneumatic tool, or spray paint application, all at one time. The best advice to make sure this does not happen is to install a properly sized compressed air filter at the point of use. 
|
Home » Pneuguard In-Line Filter & Dryers
Pneuguard In-Line Filter & DryersThe Walmec North America Pneuguard in-line filter/dryer provides a final last line of defense for removal of unwanted moisture, oil or other contaminants. While the Walmec North America Pneuguard in-line filter/dryer is not intended to provide all the necessary filtration provided by a compressed air filter or dryer, it will provide the peace of mind at or just before the point of use.
The Walmec North America Pneuguard In-Line Filter/Dryer will flow an amazing 18 SCFM. It can be placed up to six feet in front of the tool it is protecting. The replacement cartridge should be changed once a month. With a rating of 5 micron the Walmec North America Pneuguard in-line filter/dryer has unlimited uses, such as protecting portable tools, filling tires, final paint gun protection, etc. With a very durable and rugged brass housing the Pneuguard in-line filter/dryer may be the last compressed filter you will ever need. It comes with 1⁄4" or 3 ⁄8" NPT Female ends that can be fitted to your equipment or hoses. For more information on choosing the best in-line filter/dryer for your application, contact Walmec North America today!
|
